Service Program Mode; Accessing Service Programs - Ricoh PRIPORT JP1210 Operating Instructions Manual

SilverV-gb.book Page 57 Monday, May 15, 2000 3:32 PM

3. Service Program Mode

Accessing Service Programs

The service programs can be set by
following this procedure.
Reference
For the service program menu, see
P.59 "Service Program Menu".
A
Press the { { { { Clear Modes/Energy Sav-
er} } } } key.
B
Hold down the { { { { Clear/Stop} } } } key
for at least 3 seconds.
The SP-mode display appears on
the guidance display.
Note
If you press the wrong key, try
pressing the above keys from
the beginning.
C
With the number keys, enter the
desired service program number
(SP No.).
Reference
For the SP No., see
"Service Program Menu".
When you want to leave the
service program mode
A Press the { { { { Clear Modes/Energy
Saver} } } } key.
TSLS01AE
Reference
If you want to change the set-
tings of a selected service
program, see
ing the Settings of Service Pro-
grams".
TSLS011E
P.59
P.58 "Chang-
57