Ricoh PRIPORT JP1210 Operating Instructions Manual page 85

SilverV-gb.book Page 65 Monday, May 15, 2000 3:32 PM
SP No. Mode
160 Side Ers.
161 Center Ers.
162 Horizontal Ers.
170-172 Ers.**1L
Ers.**2L
Ers.**3L
Entering decimal values in SP No. 160–162:
• Press the {Program} key to enter a decimal point.
• Press the {q} key to fix the value.
Changing the Settings of Service Programs
Function
Adjust the default side edge margin width in Edge
Erase and Centre/Edge Erase mode.
Note
Default:
• Metric Version: 5mm
• Inch Version: 0.2"
Adjustable value:
• Metric Version: 2 – 20mm
• Inch Version: 0.1" – 0.8"
Adjust the default Centre margin width in Centre/
Edge Erase mode.
Note
Default:
• Metric version: 10mm
• Inch version: 0.4"
Adjustable value:
• Metric version: 4 – 60mm
• Inch version: 0.2" – 2.3"
Adjust the default horizontal edge (top and bottom)
margin in Edge Erase and Centre/Edge Erase mode.
Note
Default:
• Metric version: 5mm
• Inch version: 0.2"
Adjustable value:
• Metric version: 2 – 20mm
• Inch version: 0.1" – 0.8"
Set up and register three original sizes for when per-
forming edge erase of non-standard size originals, or
performing centre frame erase.
Note
Default: 0 0mm
Adjustable value: 100-257mm 100-364mm
65
3