Tint Mode-Halftone Printing - Ricoh PRIPORT JP1210 Operating Instructions Manual

SilverV-gb.book Page 12 Monday, May 15, 2000 3:32 PM
Operation
Tint Mode—Halftone Printing
1
Use the {Tint/Economy} key to make
halftone prints.
A
Press the { { { { Tint/Economy} } } } key to se-
lect Tint mode (Upper indicator).
B
Set your originals on the exposure
glass or in the optional document
feeder.
C
Press the { { { { Start} } } } key.
12
D
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the {Image
Position} keys (see
justing the Print Image Position")
or the side tray fine adjusting
GRTINT0E
dial (see
Print Image Position to the Right
or Left").
E
Enter the number of prints with
the number keys.
F
Press the { { { { Print} } } } key.
TSLS012E
P.9 "Ad-
P.10 "Shifting the
TSLS014E