Adjusting The Print Image Density; Before Making A Master; After Making A Master - Ricoh PRIPORT JP1210 Operating Instructions Manual

SilverV-gb.book Page 11 Monday, May 15, 2000 3:32 PM

Adjusting the Print Image Density

You can adjust the print image densi-
ty to suit your needs. There are two
ways:

Before Making a Master

Adjust the image density using the
{Image Density} key.

After Making a Master

Adjust the image density using the
{W W W W } or {V V V V } key.
Before Making a Master
A
Use the { { { { Image Density} } } } key before
pressing the { { { { Start} } } } key.
Adjusting the Print Image Density
After Making a Master
A
Press the { { { { W W W W } } } } or { { { { V V V V } } } } key. To in-
crease the speed, press the { { { { V V V V } } } }
key. To reduce the speed, press
the { { { { W W W W } } } } key.
Note
The faster the printing speed be-
comes, the lighter the printing
density is. If you want darker
prints, decrease the printing
speed.
1
11