Ricoh PRIPORT JP1210 Operating Instructions Manual page 106

SilverV-gb.book Page 86 Monday, May 15, 2000 3:32 PM
What to do If Something Goes Wrong
- To prevent original misfeeds: - - -
• Originals heavier than 90g/m
• Originals lighter than 50g/m
• Originals heavier than 120g/m
• Originals lighter than 40g/m
• Carbon coated originals
• Damaged originals
• Originals with glue on them
• Originals perforated for ring binders
• Book originals
• Originals written with a pencil or ball-point pen
• Originals smaller than 148mm
• Originals larger than 257mm 364mm, 10.2" 14.4"
5
• Folded, curled, creased originals
• Bound, stapled, or clipped originals
• OHP transparencies
• Translucent paper
• Pasted originals
Note
If you use paste-up originals, make sure the pasted parts hold firmly to the
base sheet and press the {Paste Shadow Erase} key. If the thickness of the paste-
up original is more than 0.1mm, and the space between the pasted parts is less
than 2mm, 0.08", a shadow might appear on the prints.
The first 5mm, 0.2" of the leading edge cannot be printed. Make sure the lead-
ing edge margin is at least 5mm, 0.2".
Original
a: 5mm, 0.2"
Do not mix different sizes of originals in the optional document feeder.
Clean the separation roller if it is dirty. (A dirty separation roller might slip
and cause original misfeeds.)
Remove staples or clips of originals. Fan originals that have had staples or
clips removed.
86
2
, 23.9 lb (when setting a stack of originals)
2
, 13.3 lb (when setting a stack of originals)
2
, 31.9 lb (when setting one original at a time)
2
, 10.6 lb (when setting one original at a time)
105mm, 5.8"
Print
a
4.1"