Ricoh PRIPORT JP1210 Operating Instructions Manual page 15

SilverV-gb.book Page xi Monday, May 15, 2000 3:32 PM
14. { { { { Fine} } } } key
Press to select the fine image. See
"Fine Mode—Making Clear Prints".
15. { { { { Image Position} } } } key
Press to shift the image forwards or back-
wards. See P.9 "Adjusting the Print Image
Position".
16. { { { { Program} } } } key
Press to input or recall user programs. See
P.38 "Program—Storing Your Print Set-
tings in Memory".
17. { { { { Clear Modes/Energy Saver} } } } key
• Clear Modes
Press to clear the previously entered job
settings.
• Energy Saver
Press to switch to and from Energy Sav-
er mode. P.8 "Energy Saver Mode —
Saving Energy".
18. { { { { Auto Cycle} } } } key
Use to process the master and make prints
automatically. See
Printing from Several Originals at Once".
{ { { { Proof} } } } key
19.
Press to make proof prints.
20.
P.13 Press to adjust the printing speed. See
P.14 "Changing the Printing Speed".
21.
Press to select Memory or Class mode. See
the Same Original"or
Mode—Group Printing from Different Origi-
nals".
22.
Press to enter the desired number of prints
and data for selected modes.
23.
Use to enter data in selected modes.
24.
While entering numbers, press to cancel a
number you have entered.
While copying, press to stop copying.
25.
Press to make a master.
P.26 "Auto Cycle—
26.
Press to start printing.
{ { { { W W W W } } } } and { { { { V V V V } } } } keys (Speed keys)
{ { { { Memory/Class} } } } key
P.28 "Class Mode—Group Printing from
P.30 "Memory
Number keys
{ { { { q q } } } } key
q q
{ { { { Clear/Stop} } } } key
{ { { { Start} } } } key
{ { { { Print} } } } key
xi