Protecting A Program - Ricoh PRIPORT JP1210 Operating Instructions Manual

SilverV-gb.book Page 40 Monday, May 15, 2000 3:32 PM
Operation
E
Press the { { { { Start} } } } key.
1

Protecting a Program

If you want to prevent someone from
writing over your program, do the
following procedure.
A
While holding down the { { { { Clear/
Stop} } } } key, press the { { { { Program} } } }
key.
B
Enter "1" with the number keys.
40
C
Press the { { { { q q } } } } key.
q q
TSLS012E
Note
The numbers of the programs
which are not protected will be
displayed in the guidance dis-
play.
D
Select the program number you
want to protect with the number
keys.
E
Press the { { { { q q } } } } key.
q q
TSLS01ME
TSLS01JE
TSLS011E
TSLS01JE