When The Master Eject Indicator (K) Lights - Ricoh PRIPORT JP1210 Operating Instructions Manual

SilverV-gb.book Page 99 Monday, May 15, 2000 3:32 PM

When the Master Eject Indicator (k) Lights

The Master Eject indicator (k) and the Reset indicator light when it is time to
empty master eject box or when you need to set the master eject box.
A
Take out the master eject box and remove the used masters.
Note
Spread an old newspaper, then turn the master eject box upside down on
it to remove the used masters. Then, throw away the masters.
B
Re-install the master eject box. Push in the box until it touches the inside
bracket.
When the Master Eject Indicator (k) Lights
5
99