Ricoh PRIPORT JP1210 Operating Instructions Manual page 69

SilverV-gb.book Page 49 Monday, May 15, 2000 3:32 PM
C
Press the { { { { q q } } } } key.
q q
This stores the number of prints to be made for the first original in memory 1.
Note
When the number of prints in each set is the same, it is not necessary to in-
put the number of prints for each group in memory. Simply select Auto
Cycle mode and enter the desired number of prints once.
D
Set your originals face up into the document feeder.
Note
When you use the optional 30 originals document feeder, the originals are
fed from the bottom of the stack. Make sure that the originals are set in the
correct sequence with the first original on the bottom.
E
Press the { { { { Start} } } } key.
Printing Using the Optional 30 Originals Document Feeder
TSLS01JE
TSLH013E
TSLS012E
2
49