Printing On Thick Or Thin Paper; Pressure Lever Position - Ricoh PRIPORT JP1210 Operating Instructions Manual

SilverV-gb.book Page 23 Monday, May 15, 2000 3:32 PM

Printing on Thick or Thin Paper

When you make prints on thick (127.9
2
to 209.3g/m , 34.0 to 55.6 lb), stand-
ard (52.3 to 127.9g/m
or thin (47.1 to 52.3g/m
lb) paper, perform the following
steps.

Pressure Lever Position

A
Position pressure lever to thick,
standard, or thin paper position.
Note
When you use paper heavier
than 127.9g/m
lighter than 209.3g/m
position pressure lever to the
Thick paper position.
When you use paper heavier
than 52.3g/m
er than 127.9g/m
tion pressure lever to the
Standard paper position.
When you use paper heavier
than 47.1g/m
er than 52.3g/m
tion pressure lever to the Thin
paper position.
2
, 13.9 to 34.0 lb)
2
, 12.5 to 13.9
B
C
TSLH01CE
2
, 34.0 lb and
2
, 55.6 lb,
2
, 13.9 lb and light-
2
, 34.0 lb, posi-
2
, 12.5 lb and light-
2
, 13.9 lb, posi-
Printing on Thick or Thin Paper
In the case of paper smaller than
1 1
B5, 5 / " 8 / " and heavier
2 2
2
than 81.4g/m (21.6 lb), move
the feed roller pressure lever to
the Thin paper position.
Make sure that paper feed side
plates touch the paper lightly.
When you finish prints, position
pressure lever to the Standard pa-
per position.
1
ZCTH150E
TSLH01CE
23