Selecting Original Type - Ricoh PRIPORT JP1210 Operating Instructions Manual

SilverV-gb.book Page 24 Monday, May 15, 2000 3:32 PM
Operation

Selecting Original Type

Select one of the following three types
to match your originals:
1
Photo mode
Delicate tones of photographs and
pictures can be reproduced with
this mode.
Letter mode
Select this mode when your origi-
nals contain only letters (no pic-
tures).
Letter/Photo mode
Select this mode when your origi-
nals contain photographs or pic-
tures with letters.
Note
Moire patterns might occur when
screened originals are printed.
When using Photo mode to print
originals with both letter and pho-
tographs, the letter will appear
lighter. To avoid this, select Let-
ter/Photo mode with the {Type of
Original} key.
A
Press the { { { { Type of Original} } } } key to
select Photo mode.
24
B
Press the { { { { Image Density} } } } key to ad-
just the image density.
C
Set your originals on the exposure
glass or in the optional document
feeder.
D
Press the { { { { Start} } } } key.
E
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the {Image
Position} keys (see
ing the Print Image Position For-
ward or Backward") or the side
tray fine adjusting dial (see
P.10 "Shifting the Print Image Po-
sition to the Right or Left").
F
Make your prints.
TSLS012E
P.9 "Shift-