Ricoh PRIPORT JP1210 Operating Instructions Manual page 102

SilverV-gb.book Page 82 Monday, May 15, 2000 3:32 PM
What to do If Something Goes Wrong
R CAUTION:
• Be careful not to cut yourself on any sharp edges when you reach inside the
machine to remove misfed sheets of paper or masters.
Note
To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
When clearing misfeeds, do not turn off the main switch. If you do, your copy
settings are cleared.
If misfeeds occur repeatedly, contact your service representative.
When the open cover/unit indicator (M
Monitor Guidance Display and Action
M
CLOSE THE COVER
• Close the original tray unit.
5
• Close the front door.
CLOSE THE PLOTTER COVER
• Close the right side cover and
the plotter cover.
CLOSE THE ADF COVER
• Close the optional ADF unit.
SET THE DRUM COMPLETELY
When the supply/exchange indicators light
Monitor Guidance Display and Action
B
LOAD MORE PAPER
j
LOAD NEW INK CARTRIDGE
C
LOAD NEW MASTER ROLL
k
EMPTY MASTER EJECT BOX
• Remove the used master.
SET THE MASTER EJECT BOX
When other indicators light
Monitor Guidance Display and Action
u
SET THE KEY COUNTER
82
M ) lights M M
Page
P.97 "When the Open Cover/Unit In-
dicator ( M ) Lights".
P.97 "When the Open Cover/Unit In-
dicator ( M ) Lights".
Page
P.73 "Loading Paper on the Paper
Feed Tray".
P.75 "When the Add Ink Indicator
( j ) Lights".
P.77 "Master Roll Replacement".
P.99 "When the Master Eject Indica-
tor ( k ) Lights".
Page
P.100 "When Other Indicators
Light".