Personalised Welcome Screen - Elcometer 456 Operating Instructions Manual

8 PERSONALISED WELCOME SCREEN

A personalised welcome screen can be created and
downloaded into the gauge.
Screen dimensions are 128 pixels x 64 pixels. The
welcome screen is typically used to personalise the
gauge with a logo, serial number, user name, etc. This is
the first screen displayed when the gauge is switched on.
8.1 Creating the screen
1. Download Elcometer 'Welcome Screen Wizard'
software. This software is available free of charge
from the downloads section of the Elcometer
website, www.elcometer.com.
2. Connect gauge to PC using optional 456 to PC
connection cable - see "PC Connection Cable" on
page 44.
3. Press
4. Ensure Reading Screen is displayed.
5. Run 'Welcome Screen Wizard' software and follow
the on-screen instructions.
8.2 Deleting the screen
1. Run the 'Welcome Screen Wizard' software.
2. Click 'Next'.
3. Select 'Create a new screen setup'.
4. Click 'Next'.
5. Select 'Disabled'.
6. Click 'Next'.
Follow the remaining on-screen instructions to delete the
welcome screen.
38
key to switch on gauge.