Personalised User Screen - Elcometer 319 Standard Operating Instructions Manual

R
11.3 TRANSFERRING READING DATA USING A BLUETOOTH CONNECTION
1. Switch on your gauge and ensure the Reading Screen is displayed.
2. Enable Bluetooth communications - see "Bluetooth [T]" on page 24.
When Bluetooth is enabled, a Bluetooth symbol
During transfer of data between your gauge and your PC, the Bluetooth symbol flashes.
3. Start ElcoMaster and follow the separate instructions included with ElcoMaster.
11.4 ELCOMASTER MOBILE
ElcoMaster Mobile is an application which can be installed on Windows Mobile devices such as PDAs or
mobile phones. ElcoMaster Mobile provides much of the functionality of ElcoMaster:
• Link your gauge to your mobile device via Bluetooth
• Download reading data from your gauge to your mobile device
• View your data in the form of readings, charts, graphs, etc.
• Associate photographs with batches and view them within ElcoMaster Mobile
• Email reports from your mobile device
• Download reading data from your mobile device to ElcoMaster on your PC.

12 PERSONALISED USER SCREEN

A personalised user screen can be designed on a computer and then downloaded into your gauge. User
screen dimensions are 128 pixels x 128 pixels. The user screen is typically used to personalise the gauge
with a logo, serial number, user name, etc. This is the first screen displayed when the gauge is switched on.
30
is displayed on the right side of the display.