Appendix A: Integration And Usage Tip - Intel R2000LT2 Technical Product Specification

Intel® Server System R2000LH2/T2 Product Family TPS

Appendix A: Integration and Usage Tip

This section provides a list of useful information that is unique to the Intel
R2000LH2/LT2 Product Family and should be kept in mind while configuring your server
system.
®

Only the Intel
system. Previous generation Intel

For best system performance, follow memory population guidelines as specified in the
®
Intel Server Board S4600LH2/S4600LT2 Technical Product Specification.

For best system performance, follow all thermal configuration guidelines as specified in
this document.

The CPU-1 processor and CPU heat sink must be installed first. The CPU-2, CPU-3,
and CPU-4 heat sinks must be installed at all times, with or without a processor installed.

The Mini-SAS connector labeled SCU_1(4-7) on the server board is only functional when
an appropriate Intel

Many integrated on-board SAS and RAID options are available by installing any of
several available Intel

The FRUSDR utility must be run after the hardware integration is complete in order to
load the proper Sensor Data Records for the server chassis onto the server board.

Make sure the latest system software is loaded on the server. This includes System
BIOS, BMC Firmware, ME Firmware and FRUSDR. The latest system software can be
downloaded from the Intel web site.
Revision 1.0
®
Xeon processor E5-4600 product family is supported in this Intel server
®
Xeon
®
RAID C600 Upgrade Key is installed.
®
RAID C600 Upgrade Keys.
Appendix A: Integration and Usage Tip
®
processors are not supported.
®
Server System
97