Cisco Unified Wireless Ip Phone 7925G, 7925G-Ex, And 7926G Administration Guide - Cisco 7925G Administration Manual

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Web Pages
Item
Restricted Data Rate
WLAN Security
Security Mode
Export Security
Credentials
Wireless Security Credentials
Username
Password
Prompt Mode
WPA Pre-shared Key Credentials
Pre-shared Key Type
Description
Restricted Data Rate is set
Note
in the Cisco Unified
Communications Manager
Administration, and cannot
be set from the phone. The
phone displays the current
setting.
Enables or disables the restriction of
the upstream and downstream PHY
rates according to Cisco Compatible
Extension (CCX) V4 Traffic Stream
Rate Set IE (S54.2.6). The default is
disabled.
Assigns the security mode
Controls whether the wireless
security credential data can be
exported in the configuration file.
• True: Allows exporting the data
• False: Blocks exporting the data
Assigns the network authentication
username for this profile
Assigns the network authentication
password for this profile
Available only for Network
Note
Profile 1.
If enabled, then the user must enter
the password when powering on the
phone.
If disabled, the password is saved to
the phone memory, and the user does
not need to enter the password when
powering on the phone.
Determines the key type: Hex or
ASCII

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide

Network Profile Settings
For more information, see ...
Set Up Advanced Profile Settings, on page
94
Set Up Username and Password, on page
83
Pre-Shared Key Setup, on page 83
77