Network Profile Settings; Cisco Unified Wireless Ip Phone 7925G, 7925G-Ex, And 7926G Administration Guide - Cisco 7925G Administration Manual

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Web Pages
Enabled
Name
SSID
Status
To display the Network Profiles list, access the web page for the phone as described
on page
For more information about configuring network profiles, see the following sections.

Network Profile Settings

You can configure the profile settings using this web page area. You can also modify or view configured
profiles from this web page area. The following table describes the basic and advanced profile settings and
provides references for more information.
To display Network Profile (1-4) Settings, access the web page for the phone as described in
Web Page, on page
Table 19: Basic Network Profile Settings
Item
Wireless
Profile Name
SSID
Edit Profile
Call Power Save Mode
Indicates whether or not the profile is enabled.
Lists the name for the profile.
Lists the SSID used by the profile.
Indicates which profiles are active or inactive.
69, and then click the Network Profiles hyperlink.
69, and then click the Profile (1-4) hyperlink.
Description
Descriptive name for the profile.
Assigns the Service Set Identifier
(SSID) to this profile. You must
assign the same SSID to the phone
that is also assigned to access points
in the wireless network.
Enables editing of the profile.
Set for the type of power saving
mode used in the WLAN. Options
are:
• U-APSD/PS-Poll
• None

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide

Network Profile Settings
Access Phone Web Page,
For more information, see ...
AP Association, on page 34
802.11 Standards for WLAN
Communications, on page 24
Access Phone
75