Chapter 4 Cisco Unified Wireless Ip Phone 7925G, 7925G-Ex, And 7926G Web Pages; Web Pages Overview; Pc Setup For Phone Setup - Cisco 7925G Administration Manual

Cisco Unified Wireless IP Phone 7925G,
7925G-EX, and 7926G Web Pages
•
•
•
•
•
•
•
•
•

Web Pages Overview

This chapter describes how to set up your PC to configure a Cisco Unified Wireless IP Phone 7925G,
7925G-EX, and 7926G by using a USB connector and how to remotely access a configured phone over the
WLAN. It contains the following sections:

PC Setup for Phone Setup

To set up new phones, use your PC and USB connection to enter the initial configuration for the wireless
network settings and network profiles. To save time during initial deployment, you can create a standard
network profile template and export it to several phones.
Before you can configure phones by using the USB connection, you must install drivers and set up the USB
ports on the phone and PC.
Your PC must have one of the following operating systems:
• Windows 2000 32 bit
Web Pages Overview, page 67
PC Setup for Phone Setup, page 67
Remote Phone Updates, page 70
Network Profiles, page 74
Set Up USB Settings on PC, page 95
Set Up Trace Settings, page 96
Set Up Wavelink Settings, page 99
Phone Book Setup, page 100
System Settings, page 104
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
4
C H A P T E R
67