Cisco 7925G Administration Manual page 264

Unified wireless ip phone
Hide thumbs Also See for 7925G:
Table of Contents

Advertisement

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Installation
Step 9
Associate a user to a user group. This step assigns to users a common list of roles and permissions that apply
to all users in a user group. Administrators can manage user groups, roles, and permissions to control the level
of access (and, therefore, the level of security) for system users.
Note
For more information, see the Cisco Unified Communications Manager Administration Guide:
• "End User Configuration" chapter, "End User Configuration settings" section
• "User Group Configuration" chapter, "Adding Users to a User Group" section
Step 10 Associate a user with a phone. This step is optional if you do not want users to have access to User Options.
This step provides users with control over their phone such as forwarding calls or adding line view speed-dial
numbers or services.
Note
For more information, see Cisco Unified Communications Manager Administration Guide, "End User
Configuration" chapter, "Associating Devices to a User" section.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G
Installation
The following steps provide an overview and checklist of installation tasks for the Cisco Unified Wireless IP
Phone 7925G, 7925G-EX, and 7926G. The steps presents a suggested order to guide you through the phone
installation. Some tasks are optional, depending on your system and user needs. For detailed procedures and
information, see the sources in the steps.
Procedure
Step 1
Assemble the phone components and charge the battery.
For more information, see
page
Step 2
Configure the network profile by using the USB cable and the phone web page.
For more information, see
Step 3
Configure the phone settings by using the Settings menu on the phone.
For more information, see
Step 4
Power on the phone and monitor the phone startup process.
For more information, see:
Step 5
Make calls with the wireless IP phone.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
244
Applicable to Cisco Unified Communications Manager Administration Release 5.x and
later.
Some phones, such as those used by multiple users, do not have an associated
user.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Installation, on
20.
Access Web Page for Phone, on page
Phone Settings Menu, on page
Phone Startup Process, on page 64
Startup and Connectivity Problems, on page 209
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Deployment Overview
195.
127.

Advertisement

Table of Contents
loading

This manual is also suitable for:

7925g-ex7926g

Table of Contents