Cisco Unified Wireless Ip Phone 7925G, 7925G-Ex, And 7926G Administration Guide - Cisco 7925G Administration Manual

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Web Pages
Information
Immediate Neighbor
The following table lists the information that is provided in the AP details report.
Table 25: AP Details Report
Field
AP
MAC
Observation Count
Channel - Frequency
Country
Beacon Interval
DTIM Period
RSSI Range [Lo Hi]
BSS Lost Count
Description or indicator
Information may be displayed in the following way:
• Pink background: If AP is on the same channel as the best AP.
Being on the same channel as the best AP might indicate a
Note
problem with the channel re-use pattern, particularly if the
percentage of time the AP is an immediate neighbor is relatively
high compared with other immediate neighbors.
• Asterisk (*): Not an immediate neighbor.
Information displayed in cell (for example, 27%-61/-39):
• Percentage of time the AP is the immediate neighbor of the best AP.
• RSSI range during the time the AP is the immediate neighbor.
Description
Name of the AP if it is CCX-compliant; otherwise, the MAC address
is displayed here.
MAC address of the AP.
Number of sweeps where this AP has been observed.
The last channel and frequency where this AP was observed.
A two-digit country code. Country information might not be displayed
if the country information element (IE) is not present in the beacon.
Number of time units between beacons. A time unit is 1.024 ms.
Every nth beacon is a delivery traffic indication message (DTIM) period.
After each DTIM beacon, the AP sends any broadcast or multicast
packets that may have been queued for power-save devices.
The entire RSSI range in which this AP has been observed.
The Basic Service Set (BSS) Lost Count increments when the phone
passes a threshold number of missed beacons. Missed beacons identify
synchronization problems.

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide

Site Survey Report
111