Cisco 7925G Administration Manual page 201

Security, Device, Model, Status, and Call Statistics Information
Item
Domain Name
IP Address
Subnet Mask
TFTP Server 1
TFTP Server 2
Default Router 1
DNS Server 1
DNS Server 2
Load Server
CDP Enabled
DHCP Enabled
Alternate TFTP
WLAN
Profile Name
SSID
802.11 Mode
Scan Mode
Restricted Data Rates
Call Power Save Mode
Security Mode
Description
Name of the DNS in which the phone resides.
IP address of the phone.
Subnet mask used by the phone.
Primary TFTP server used by the phone.
Secondary TFTP server used by the phone.
IP address for the default gateway used by the phone.
Primary DNS server used by the phone.
Backup DNS server used by the phone.
Host name or IP address for the alternate server that the phone uses for
firmware upgrades.
Indicates whether the network is using Cisco Discovery Protocol (CDP).
Indicates whether this phone is using DHCP for its IP address assignment
or not.
Indicates whether this phone uses a TFTP server other than the one assigned
by DHCP.
Name of the network profile that the phone is currently using.
Service Set ID that the phone is currently using.
Wireless signal mode that the phone is currently using.
Indicates when the phone scans. Configured in the Cisco Unified
Communications Manager Administration.
Indicates the Traffic Stream Rate Set (TSRS) information element from
CCX 1, which can define a data range for the client to use.
Type of power save mode that the phone uses to save battery power: PS-Poll
or U-APSD.
Authentication method that the phone is currently using in the wireless
network.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
Device Information Fields
181