Change Cisco Discovery Protocol Settings - Cisco 7925G Administration Manual

Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Settings
For information about entering values, see
Step 8 Press Options > Validate to save the entry or press Options > Cancel.

Change Cisco Discovery Protocol Settings

Some network devices do not use Cisco Discovery Protocol (CDP).
To change whether the phone transmits CDP packets and settings associated with CDP, follow these steps in
Cisco Unified Communications Manager Administration:
Procedure
Step 1 Choose Device > Phone.
Step 2 Click Find and locate the phone in the displayed list.
Step 3
Scroll to Device Information.
Step 4 Scroll to Cisco Discovery Protocol (CDP).
Step 5 Click Enabled from the drop-down menu.
Step 6 Click Save and Reset, if prompted.
Erase Network Profile Configuration
You can erase the network profile configuration and return to the default settings.
To erase the configuration, follow these steps:
Procedure
Step 1 Choose SETTINGS > Network Profiles.
Step 2
To select the profile name that you want to configure, scroll to the item and press the View button.
Step 3 Enter **# to unlock the profile and press Edit.
Step 4 Select Network Configuration.
Step 5 Scroll to Erase Configuration and press Yes to erase or No.
Related Topics
Change Profile Name, on page 117
WLAN Configuration Settings, on page 124
Network Profile Data Input Guidelines, on page
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G Administration Guide
DHCP Settings
118.
123