Flowchart To Remedy The Troubles - Renesas Emulation Pod M30100T3-RPD-E User Manual

Chapter 6. Troubleshooting

6.1 Flowchart to Remedy the Troubles

Figure 6.1 shows the flowchart to remedy the troubles from when power to the emulator is activated
until the emulator debugger starts up. Check this while the target system is disconnected. For the latest
FAQs, visit the following URL.
Figure 6.1 Flowchart to remedy the troubles
http://www.renesas.com/eng/products/mpumcu/toolhp/faq/m16c/m16c_e.htm
Turning on the power of PC4701
Front panel LED of PC4701
Normal
Init dialog box of emulator
debugger displayed
Normal
Error displayed
No
Program window of emulator debugger displayed
Not normal
1. Check emulator system connections.
See, "3.4 Connecting the PC4701 and Emulation Pod"
(page 27).
2. Redownload the firmware.
See "4.2 Downloading Firmware" (page 34).
3. Restart the PC4701 system.
Not normal/Error displayed
1. Check the operating environment etc. of the emulator
debugger.
See the user's manual (online manual) of the emulator
debugger.
2. Reinstall the emulator debugger.
Not normal/Error displayed
See "6.2 (2) Errors Occur When Starting Up the Emulator
Debugger (When the target system is connected)" (page 44).
See "6.2 (3) Errors Occur When Starting Up the Emulator
Debugger (When the target system is not connected)" (page
45).
( 42 / 52 )