Chapter 3. Setting Up - Renesas Emulation Pod M30100T3-RPD-E User Manual

This chapter describes switch settings required for using this product and how to connect this product to the PC4701 and
the target system.
3.1 Removing and Closing the Upper Cover.................................................................................... 22
3.2 Selecting Clock Supply and Replacing Oscillator Circuit Boards ............................................. 23
(1) Clock Supply to the MCU .................................................................................................... 23
(2) Using the Oscillator Circuit on the Target System ............................................................... 24
(3) Changing the Internal Oscillator Circuit of the Emulation Pod............................................ 25
(4) Replacing the Oscillator Circuit Boards ............................................................................... 26
3.3 Jumper Switches JP1 and JP2 on the M30100T-PRT Board ..................................................... 27
3.4 Connecting the PC4701 and Emulation Pod .............................................................................. 27
(1) Connecting the Cable to the PC4701 .................................................................................... 27
(2) Connecting the Cable to the Emulation Pod ......................................................................... 28
3.5 Connecting the Pod Probe .......................................................................................................... 29

Chapter 3. Setting Up

( 21 / 52 )