Status Area Settings; Barometric Reference Option - GE PACE5000 User Manual

PACE Pressure Controller User Manual

Status area settings

Enables the user to view an operating condition or parameter of the instrument:
Full-scale - pressure in current selected units of the pressure range.
Source - positive and negative source pressure values in current selected units.
Effort meter - indicates controller effort.
In Limits meter - indicates controller in-limits condition and time to in-limits.
Module logic I/P - indicates status condition of logic input of control module.
Vent and +ve FS - enables vent selection and shows full-scale pressure in current selected units.
Zero and +ve FS - enables zero selection and shows full-scale pressure in current selected units.
Rate - indicates slew rate set.
Barometric - displays barometric pressure.
Tare - indicates tare condition and value.
Analogue Output - If option installed
- Displays Module1 pressure minus Module2 pressure (P2-P1)
P1 - P2
3.7

Barometric Reference Option

If installed, this option allows absolute or gauge pressure range selection. To obtain absolute
pressure the instrument uses a summation of gauge pressure and barometric pressure
(measured by the barometric sensor).
performance of barometric reference and precision of absolute ranges.
[EN] English
Status area examples
Full-scale
In-Limits meter
Effort meter
Vent and +ve FS
Zero and +ve FS
Barometric
(Ref: Section 6.8 Options)
3 - 15
and the data sheets for the
K0443 Revision A