Reference Pressure; Go To Ground - GE PACE5000 User Manual

PACE Pressure Controller User Manual
Static
Altimeter
Pressure
regulator
Units
The units can be either the aeronautical or pressure units. The units can be changed any
time between pressure and pressure converted to aeronautical units. The display shows the
output pressure converted to Altitude, CAS or Mach using BS 2G 199:1984* conversions and
assuming standard atmospheric conditions.
*Based on tables from ICAO Standard Atmosphere 1964.

Reference Pressure

Select the required reference pressure, this can be either the barometric pressure (from the
instrument's internal barometric sensor), or any numeric value (e.g.) 1013.25 mbar.

Go to ground

Returns the instrument and any UUT, connected to it, safely to ground pressure at a
controlled rate.
[EN] English
Pitot
Module 2
SUPPLY OUTLET VENT REF
+ -
Pressure
regulator
6 - 35
Static (Altitude)
Module 1
SUPPLY OUTLET VENT REF
+ -
Rear view of
PACE
instrument
Static
ASI/Mach
Pitot
Pressure
source
Vacuum
source
K0443 Revision A