Set-Up; Language Setting; Date And Time Settings; Temperature Setting - GE Druck TRX-II User Manual

SET-UP

Language Setting

The TRX-II has multilingual software. The factory setting is
ENGLISH.
Setting the Language
Leave the cursor at NONE at the measure and source menu and
press # and EXE keys simultaneously to open the Set-up menu.
Select LANGUAGE and press EXE. Select required language and
press EXE. Press CE to leave the set-up menu.

Date and Time Settings

The TRX-II is equipped with a real time clock. At calibration, the
clock is set to Central European Time.
• To record Date and Time on the memory card when using
compatible software;
• To indicate how many days are left before last calibration expires.
Setting the clock to local date and time
Leave the cursor at NONE at the measure and source menu and
press the # and EXE keys simultaneously to open the set-up menu.
Select DATE/TIME. Press EXE again. Select date and enter new
date. Press EXE to accept new date. Repeat the above for time
settings. Press CE to leave the set-up menu.

Temperature Setting

Temperature simulations and measurements can be shown in either
degrees Celsius or degrees Fahrenheit. Factory setting is Celsius.
Readings are based on either IPTS 68 or ITS 90 temperature scales.
Factory setting is IPTS 68.
Changing the temperature units
Leave the cursor at NONE at the measure and source menu and
press the # and EXE keys simultaneously to open the set-up menu.
Select temp. settings and press EXE. Select °C and press EXE to
change from °C to °F or vice versa. Press CE to leave the set-up
menu.
EN-8 K319 Issue 2