Description; Pace5000 General View; Pace6000 General View; Introduction - GE PACE5000 User Manual

PACE Pressure Controller User Manual
1

Description

1.1

Introduction

The PACE5000 single-channel and PACE6000 single/dual-channel, Pressure Automated
Calibration Equipment measures and controls pneumatic pressures and displays, on a
touch-screen, the pressure measurement and controller status. The touch-screen enables
selections and settings in both measure and control modes. The instrument can be operated
remotely through communication interfaces.
The rear of the instrument houses all the electrical and pneumatic output and input
connections. The electrical connections provide an a.c. power supply, serial and parallel
communication interfaces, d.c. output and logic input and output. The system pneumatic
controller module contains a positive and negative pressure supply port, an output port,
vent port and reference port.
The instrument can be mounted in a standard 19 inch rack system (rack-mount option).
[EN] English
Figure 1-1 PACE5000 General view
Figure 1-2 PACE6000 General view
1 - 1 K0443 Revision A