PACE Pressure Controller User Manual
4.9
Pressure module replacement
WARNING
TURN OFF THE SOURCE PRESSURE AND VENT THE PRESSURE LINES BEFORE
DISCONNECTING OR CONNECTING THE PRESSURE LINES. PROCEED WITH CARE.
3
1 - Pressure module 2 - Instrument case
Remove
1.
(Ref: Filter replacement, Remove, Section
2. Fit the blanking plate (supplied) to protect the internal components.
Replace
1. Fit a fully compatible pressure module (1) into the instrument case (2).
2.
(Ref: Installation, Section
[EN] English
(Ref: Figure 4-3, Pressure module)
1
Figure 4-3 Pressure module
4.8).
2).
4 - 5
2
3 - Blanking plate
K0443 Revision A