6 Reference and Specification
(Ref: Figure 2, measurement mode)
1
(Ref: Figure 3, Control mode)
In control mode each control can have an individual set-point.
If Hold is selected
Note: The altitude and airspeed controllers are still actively ON, but held at the selected
range.
1
If Resume is selected
the set-points.
K0443 Revision A
both controllers in measurement mode.
Figure 3 Control mode
both controllers in control mode.
(Ref: Figure 3, Item 1, Control mode)
Figure 4 Set-points
(Ref: Figure 4, Item 1, Set-points)
a set altitude or speed will be held.
the altitude and speed will continue to
6 - 38
[EN] English