Setup
Parameters
The built-in setup parameters of the scanner fall into
four general categories:
Keyboard Wedge
General Setup
Message Format
Symbologies
Each category controls parameters that relate to
specific functions of scanner operations and its
operation in wedge mode.
Keyboard Wedge Parameters
Parameters that configure the scanner to operate in
keyboard wedge mode include:
Enable Wedge Mode
Select Terminal Type
Chapter 4 shows how to enable the scanner to operate
in wedge mode with a specific terminal type.
General Setup Parameters
General setup parameters are basic to the operation
of the scanner. These parameters control:
System Status Display
Power Consumption
Beeper Operation
Capture Count
Spotter Beam
Autosense Mode
General parameters are set by scanning bar code
labels in Chapter 5.
Chapter 2
Overview of Scanner
2–3