Siemens SIMOTION C Operating Instructions Manual page 134

Addressing
6.1 Slot-oriented address allocation for modules (default addresses for centralized I/O)
Module start addresses
The following table shows the assignment of module start addresses to slot numbers and
racks.
In the case of input/output modules, the input addresses and output addresses start from the
same module start address.
Table 6- 1 Module start addresses of signal modules
Module Module start
carrier addresses
0 Digital
Analog
1 Digital
Analog
The FM and CP modules are assigned to the analog address range.
1)
Note
Do not insert any non-configured modules centrally. Modules that are installed but not
configured are repeatedly addressed via the I/O bus. This requires additional computing
time.
134
1 2
PS SIMOTION C
1)
- -
1)
Slot number
3 4 5
IM 365 S 0 4
256 272
IM 365 R 32 36
384 400
6 7 8 9
8 12 16 20
288 304 320 336
40 44 48 52
416 432 448 464
Operating Instructions, 02/2012
10 11
24 28
352 368
56 60
480 496
SIMOTION C