2. Select the location on the screen where you want the on-screen display menus to appear.
3. Select Enter.
Changing the language
Choose the language you want displayed on projector display panel and on-screen display.
1. Select MENU > Languages.
You can also select the language from MENU > System Settings > Menu Preferences >
Languages.
2. Select Enter.
3. Select the appropriate language and select Enter.
The change takes effect immediately.
Changing the temperature units
Set if the temperature is measured in Celsius or Fahrenheit.
1. Select MENU > System Settings > Menu Preferences > Temperature Units.
2. Select the temperature unit: Celsius or Fahrenheit.
3. Select Enter.
Changing the user account password
The user account password limits access to the functionality on the web interface to authorized users.
Christie recommends changing the default user account password.
This feature is only available on the web interface.
1. From the home page of the web interface, select MENU > Admin > Remote Password.
2. Click the Current Password and type your current password.
3. Click New Password and type your new password.
Create your password using 4 to 32 characters. The password can be any combination of
letters, numbers, and symbols (ASCII-standard characters only). Accents and accented
characters are not supported.
4. Click Confirm and retype your new password.
5. Click Apply.
Accessing the generated user account password
If the user account password is not available, the generated password can be used to access the
functionality on the web interface.
Note the following about the generated user account password:
•
The generated password can be used to change the user account password.
4K40-RGB User Guide–D4K40-RGB, Roadie 4K40-RGB
020-102958-05 Rev. 1 (04-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
Configuring system settings
35