Universal Setup - Lexmark B2546 User Manual

Understanding the printer menus
Menu item
Configure MP
Cassette*
Manual
First
Note: An asterisk (*) next to a value indicates the factory default setting.
Media Configuration menu

Universal Setup

Menu item
Units of Measure
Inches
Millimeters
Portrait Width
3–14.17 inches (8.50*)
76–359.91 mm (216*)
Portrait Height
3–14.17 inches (14*)
76–359.91 mm (356*)
Feed Direction
Short Edge*
Long Edge
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer when to pick paper loaded in the multipurpose feeder.
Notes:
•
When set to Cassette, the printer treats the multipurpose feeder like a
tray.
•
When set to Manual, the printer treats the multipurpose feeder like a
manual feeder.
•
When set to First, the printer picks paper from the multipurpose feeder
until it is empty, regardless of the required paper source or paper size.
Description
Specify the unit of measurement for the universal paper.
Note: Inches is the U.S. factory default setting. Millimeters is the
international factory default setting.
Set the portrait width of the universal paper.
Set the portrait height of the universal paper.
Set the printer to pick paper from the short edge or long edge
direction.
Note: Long Edge appears only when the longest edge is shorter
than the maximum width supported.
42