Device - Lexmark B2546 User Manual

Understanding the printer menus

Device

Preferences
Menu item
Display Language
[List of languages]
Country/Region
[List of countries]
Run Initial Setup
Yes
No*
Displayed information
Display Text 1 (IP Address*)
Display Text 2 (Date/Time*)
Custom Text 1
Custom Text 2
Date and Time
Configure
Current Date and Time
Manually Set Date and Time
Network Time Protocol
Enable NTP
NTP Server
Paper Sizes
U.S.*
Metric
Flash Drive Access
Enabled*
Disabled
Screen Timeout
10–300 (60*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the language of the text that appears on the display.
Note: Not all languages are available for all printer models.
You may need to install special hardware for some
languages to appear.
Identify the country that the printer is configured to operate.
Run the setup wizard.
Specify the information to appear on the home screen.
Note: Custom Text 1 and Custom Text 2 appear only in some
printer models.
Configure the printer date and time.
Notes:
•
Enable Authentication appears only in some printer
models.
•
When Enable Authentication is set to MD5 key, Key ID
and Password appear.
Specify the unit of measurement for paper sizes.
Note: The country or region selected in the initial setup
wizard determines the initial paper size setting.
Enable access to the flash drive.
Note: This menu item appears only in some printer models.
Set the idle time in seconds before the display shows the home
screen, or before the printer logs off a user account
automatically.
26