Lexmark B2546 User Manual page 10

Learning about the printer
•
Make sure that airflow in the room meets the latest revision of the ASHRAE 62 standard or the CEN Technical
Committee 156 standard.
•
Provide a flat, sturdy, and stable surface.
•
Keep the printer:
–
Clean, dry, and free of dust
–
Away from stray staples and paper clips
–
Away from the direct airflow of air conditioners, heaters, or ventilators
–
Free from direct sunlight and humidity extremes
•
Observe the recommended temperatures and avoid fluctuations.
Ambient temperature 10 to 32°C (50 to 90°F)
Storage temperature 0 to 40°C (32 to 104°F)
•
Allow the following recommended amount of space around the printer for proper ventilation:
1 Top
2 Rear
3 Right side 110 mm (4.33 in.)
4 Front
5 Left side
305 mm (12 in.)
100 mm (3.94 in.)
305 mm (12 in.)
Note: The minimum space needed in front of the printer is 76 mm (3 in.).
65 mm (2.56 in.)
10