Custom Types Menu; Custom Names Menu; Custom Scan Sizes Menu; Universal Setup Menu - Lexmark 7527-415 CX410e User Manual

Understanding the printer menus
Use
Heavy Loading
Duplex
Off
Custom [x] Loading
Duplex
Off
Notes:
•
Duplex sets the printer default to two‑sided printing for every print job unless one‑sided printing is selected from
Printing Preferences or the Print dialog.
•
Off is the factory default setting for all the menus.

Custom Types menu

Custom Names menu

Use
Custom Name [x]

Custom Scan Sizes menu

Use
Custom Scan Size [x]
Scan Size Name
Width
Height
Orientation
2 scans per side
Off
On

Universal Setup menu

Use
Units of Measure
Inches
Millimeters
To
Determine and set two‑sided printing for all print jobs that specify
Heavy as the paper type.
Determine and set two‑sided printing for all print jobs that specify
Custom [x] as the paper type.
Note: Custom [x] Loading is available only when the custom type is
supported.
To
Specify a custom name for a paper type. This name replaces Custom Type [x] in
the printer menus.
To
Specify a custom scan size name, size, and page orientation.
Notes:
• 8.5 inches is the U.S. factory default setting for Width. 216 mm is the
international factory default setting for Width.
•
14 inches is the U.S. factory default setting for Height. 356 mm is the
international factory default setting for Height.
• Portrait is the factory default setting for Orientation.
•
Off is the factory default setting for 2 scans per side.
To
Identify the units of measure.
Notes:
•
Inches is the U.S. factory default setting.
• Millimeters is the international factory default setting.
126