Lexmark B2546 User Manual page 15

Loading paper and specialty media
2
Adjust the paper guides to match the size of the paper that you are loading.
3
Flex, fan, and align the paper edges before loading.
4
Load the paper stack with the printable side facedown, and then make sure that the side guides fit snugly
against the paper.
Notes:
•
Load letterhead facedown with the top edge of the sheet toward the front of the tray for one‑sided
printing.
•
Load letterhead faceup with the bottom edge of the sheet toward the front of the tray for two‑sided
printing.
•
Do not slide paper into the tray.
•
To avoid paper jams, make sure that the stack height is below the maximum paper fill indicator.
5
Insert the tray.
If necessary, set the paper size and paper type from the control panel to match the paper loaded.
15