Enabling The Usb Port - Lexmark B2546 User Manual

Troubleshooting
Action
Step 6
Check if the web proxy servers are disabled.
Are the web proxy servers disabled?
Step 7
Access the Embedded Web Server.
Did the Embedded Web Server open?
Unable to read flash drive
Action
Step 1
Check if the printer is not busy processing another print, copy,
scan, or fax job.
Is the printer ready?
Step 2
Check if the flash drive is inserted into the front USB port.
Note: The flash drive does not work when it is inserted into the
rear USB port.
Is the flash drive inserted into the correct port?
Step 3
Check if the flash drive is supported. For more information, see
"Supported flash drives and file types" on page
Is the flash drive supported?
Step 4
a
Check if the USB port is enabled. For more information, see
"Enabling the USB port" on page
b
Remove, and then insert the flash drive.
Does the printer recognize the flash drive?

Enabling the USB port

1
From the control panel, navigate to:
> Settings >
2
Select Enable USB Port, and then press
96.
> Network/Ports >
Yes
Go to step 7.
The problem is
solved.
Yes
Go to step 2.
Go to step 3.
Go to step 4.
23.
The problem is
solved.
> USB >
.
96
No
Contact your
administrator.
Contact customer
support.
No
Wait for the printer to
finish processing the
other job.
Insert the flash drive
into the correct port.
Insert a supported
flash drive.
Contact customer
support.