Lexmark B2546 User Manual page 47

Understanding the printer menus
Menu item
IPv4
Enable DHCP
On*
Off
IPv4
Set Static IP Address
IP Address
Netmask
Gateway
Enable IPv6
On*
Off
Enable DHCPv6
On
Off*
Stateless Address
Autoconfiguration
On*
Off
DNS Address
Manually Assigned IPv6 Address
Manually Assigned IPv6 Router
Address Prefix
0–128 (64*)
All IPv6 Addresses
All IPv6 Router Addresses
Network Address
UAA
LAA
PCL SmartSwitch
On*
Off
PS SmartSwitch
On*
Off
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Enable Dynamic Host Configuration Protocol (DHCP).
Note: DHCP is a standard protocol that allows a server to dynamically
distribute IP addressing and configuration information to clients.
Set the static IP address of your printer.
Configure IPv6 in the printer.
Run DHCPv6 in an IPv6 network.
Set the network adapter to accept the automatic IPv6 address configuration
entries provided by a router.
Specify the DNS server address, IP address, and the router for IPv6 network.
Show all IP and router addresses used in an IPv6 network.
Show the printer Media Access Control (MAC) addresses: Locally Administered
Address (LAA) and Universally Administered Address (UAA).
Note: You can change the printer LAA manually.
Set the printer to switch automatically to PCL emulation when a print job
requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
Set the printer to switch automatically to PS emulation when a print job requires
it, regardless of the default printer language.
Note: If PS SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
47