Understanding the printer menus
Custom Types menu
Use
Custom Type [x]
Paper
Card Stock
Transparency
Glossy
Rough/Cotton
Labels
Envelope
Recycled
Paper
Card Stock
Transparency
Glossy
Rough/Cotton
Labels
Envelope
Universal Setup menu
Use
Units of Measure
Inches
Millimeters
Portrait Width
3–14.17 inches
76–360 mm
Portrait Height
3–14.17 inches
76–360 mm
To
Associate a paper or specialty media type with a factory default Custom Type [x]
name or a user‑defined custom name created in the Embedded Web Server or
TM
MarkVision
Professional.
Notes:
•
Paper is the factory default setting for Custom Type [x].
•
The custom media type must be supported in the selected tray or feeder
in order to print from that source.
Specify a paper type when Recycled is selected.
Notes:
•
Paper is the factory default setting.
•
The Recycled paper type must be supported in the selected tray or
feeder in order to print from that source.
To
Identify the units of measure.
Notes:
•
Inches is the U.S. factory default setting.
•
Millimeters is the international factory default setting.
Set the portrait width.
Notes:
•
If the width exceeds the maximum, then the printer uses the
maximum width allowed.
•
8.5 inches is the U.S. factory default setting. You can increase the
width in 0.01‑inch increments.
•
216 mm is the international factory default setting. You can increase
the width in 1‑mm increments.
Set the portrait height.
Notes:
•
If the height exceeds the maximum, then the printer uses the
maximum height allowed.
•
14 inches is the U.S. factory default setting. You can increase the
height in 0.01‑inch increments.
•
356 mm is the international factory default setting. You can increase
the height in 1‑mm increments.
58