Silence Period; Fax Recording - Vidicode Octo Manual

Press CHANGE CHANGE to enable or disable Automatic Answering.
CHANGE CHANGE
•
When set the next menu item will be "Silence Period", which is used to
detect a remote hang-up in case there is no normal disconnect tone.
4.3.4
If you have selected Voice
display the Silence Period setting.
The display will show:
Install Line 1

Silence period:

NEXT
Press - - - - or + + + + to alter the Silence Period up to 120 seconds.
•
Select a value between 1 and 120 seconds. Keep in mind that when a call
is put on hold the audio level drops and the recording is possibly
stopped, when the call resumes a new recording may start again. In
order to keep the call in one recording a larger Silence Period is
suggested. For the recording of radio communication it is preferred to
keep the Silence period small to prevent consecutive communications in
one recording.
4.3.5
Fax Recording configures the line for the recording of fax traffic.

Fax Recording

Fax Recording Fax Recording
Following the Start method setting as described above the display will
show:
Install Line 1
Fax Recording:
NEXT
Press CHANGE CHANGE to enable or disable Fax Recording.
CHANGE CHANGE
•
When Fax Recording is enabled the Automatic Gain Control, Speech
Compression and Notification are omitted because they interfere with
the fax transmission.
26 Manual Call Recorder Octo | Quarto © Vidicode 2010
Silence Period
Voice recording as Start method pressing NEXT
Voice Voice
- CHANGE
Fax Recording
9s
+
Off
CHANGE
NEXT will
NEXT NEXT
BACK
BACK