How To Control The Unit - ACME LED-MTX36 HEX User Manual

use the UP and DOWN button to select On or Off, press the ENTER button to store. Press the
MENU button back to the last menu or idling 30 seconds to exit menu mode.
Manual Test
Select Manual Mode, press the ENTER button to confirm, the present mode will blink on the
display, use the UP and DOWN button to select the Number or Letter, press the ENTER button and
use the UP and DOWN button to adjust the value from 0 ~ 9 and A ~ Z, a ~ z, press the ENTER
button to store. Press the MENU button back to the last menu or idling 30 seconds to exit menu
mode.
Auto Test
Select test, press the ENTER button to confirm, then the unit will test by itself. Press the MENU
button back to the last menu.
Fixture Time
Press the MENU button up to when the Fixture Time is blinking on the display. Press the ENTER
button and the display will show the number of working hours of the unit. To go back to the
functions press the MENU button again.
Software Version
Press the MENU button up to when the Software Version is blinking on the display. Press the
ENTER button and the display will show the version of software of the unit. To go back to the
functions press the MENU button again.
6. How To Control The Unit
You can operate the unit in two ways:
1. By master/slave built‐in preprogram function
2. By universal DMX controller
3. By multimedia software via ArtNet
No need to turn the unit off when you change the DMX address, as new DMX address setting will
be affected at once.
13A