ACME LED-MTX36 HEX User Manual page 12

DMX Address
Select the DMX Address, press the ENTER button to confirm, the display will show the present
address. Use the UP and DOWN button to select Port A or Port B (Port B only appears under
PairShow channel mode) and adjust the address (The address value range will be different when
select different channel mode), press the ENTER button to store. Press the MENU button back to
the last menu or idling 30 seconds to exit menu mode.
Eth‐Net Address
Select the Eth‐Net Address, press the ENTER button to confirm. Use the UP and DOWN button to
select IP Addr, IP Mask, Gateway and MAC Addr, press the ENTER button to set the value for
these items. Press the MENU button back to the last menu or idling 30 seconds to exit menu
mode.
ArtNet Universe
Select the ArtNet Universe, press the ENTER button to confirm. Use the ENTER button to select
Net, Sub‐Net or Universe Port A or Universe Port B, use the UP and DOWN button to set the
value for these items. Press the MENU button back to the last menu or idling 30 seconds to exit
menu mode.
Channel Mode
Select the Channel Mode, press the ENTER button to confirm, the display will show the present
channel mode. Use the UP and DOWN button to adjust 3ChMode, 4ChMode, 36RGB, 36RGBW,
36RGBWPY or Pair Show, press the ENTER button to store. Press the MENU button back to the
last menu or idling 30 seconds to exit menu mode.
M/S Mode
Select the M/S Mode, press the ENTER button to confirm, the display will show the present
channel mode. Use the UP and DOWN button to adjust Master, Slave 1 ... Slave 4, press the ENTER
button to store. Press the MENU button back to the last menu or idling 30 seconds to exit menu
mode.
11A