Advertisement
<Installations to models C658/C558/C458>
(1) Turn OFF the power switch and unplug the
power cord from the power outlet.
(2) Open the rear right cover.
(3) Remove the connector cover at the lower portion
inside the cover. (One screw)
(4) Remove the shield cover (FAX1) from the lower
under side, inside the door. (Two screws)
Note:
When installing a second fax kit, remove the shield
cover (FAX2) from the upper side.
(5) Make sure that the fax kit switch keys are placed
in positions as shown in "Line 1" below.
Note:
When installing a second fax kit, flip the fax kit
switch keys into positions as shown in "Line 2"
below.
<Line 1>
(6) Attach the two supplied gaskets on the under-
side of the fax kit (Line1) as shown in the illustra-
tion.
E-2
<Line 2>
Advertisement
