Get Device Generation And Type (Dg); Get Device Type (Dt) - Dimetix DLS-C 15 Technical Reference Manual

T R
ECHNICAL

9.3.17 Get device generation and type (dg)

This command returns the device type, generation and current communication settings.
Works only from device generation C on.
Never use this command if more than one device is connected to the RS-422 line
Command
Return successful
Return error
Parameters

9.3.18 Get device type (dt)

This command returns the device type.
Never use this command if more than one device is connected to the RS-422 line
Command
Return successful
Return error
Parameters
Distance Laser Sensor
M
EFERENCE ANUAL
Command
dg
<trm>
gNdg+xxx+yz?
gN@Ezzz
N
Device ID
xxx
Bit coded number to identify the device:
0x53 (83)
y
(additional internal information)
z
Communication settings (see command sNbr+C)
zzz
Error code
Command
dt
gNdt+xyy<trm>
gN@Ezzz
N Device ID
x Generation shown as a number.
yy Device number.
xyy
Output for
301: DLS-C(H)
302: FLS-C(H)
zzz Error code
DLS-C / FLS-C
Page 42/53