Commissioning
7.10 [2.08] Settings > Calibrations
7.10.2
[2.08.1] Setpoints, tolerances, flow time
7.10.2.1
Overview of setpoints, tolerances, purging time
This menu gives you access to the settings you need for preparation of a
calibration/validation. The menu contains the following submenus:
Table 7- 22
Structure of the navigation lines
1.
2.
3.
4.
74
Setpoints, Tolerances, Purging Time
Setpoints
Validation tolerance
Calibration tolerance
Sample gas purging time
Compact Operating Instructions, 01/2013, A5E31805656-01
Edit ►
►
►
►
Quick Start