Siemens SIPROCESS GA700 Quick Start Manual page 67

Table 7- 17
Function
(pre-selection)
Process tags
Table 7- 18
Function
(pre-selection)
Solenoid valves
Table 7- 19
Function
(pre-selection)
DI link
Quick Start
Compact Operating Instructions, 01/2013, A5E31805656-01
Function (pre-selection) "Process tags"
Purpose/resulting settings
Output measured value of the used process tag.
1. "Function" parameter field:
Authorize access with corresponding PIN, if necessary.
2. Select one of the offered process tags.
Function (pre-selection) "Solenoid valves"
Purpose/resulting settings
Switch gas paths.
1. "Component" parameter field:
– Authorize access with corresponding PIN, if necessary.
– Select available component.
2. "Function" parameter field:
Set the following alternative gas paths:
– Sample gas
– Zero gas measuring ranges 1 to 4 (MR1 to MR4)
– Span gas measuring ranges 1 to 4 (MR1 to MR4)
Function (pre-selection) "DI links"
Purpose/resulting settings
Switch linked digital inputs.
1. "Function" parameter field:
Authorize access with corresponding PIN, if necessary.
2. Select one of the displayed links.
Additional linking properties are:
– Type of logical operation (AND/OR)
– Combining inputs
Commissioning
7.8 [2.09.5] Digital outputs
67