Identifying A Device - Siemens SIPROCESS GA700 Quick Start Manual

Commissioning
7.3 [3.09] Maintenance & diagnostics > Identification
7.3.2

Identifying a device

Procedure
1. Main menu > "3. Maintenance & Diagnostics" > "09. Identification" > "01. Device (VM)".
2. Assign device name: "TAG" parameter field.
3. Enter commissioning date: "Commissioning date" parameter field.
4. Write down the identification data, if necessary. The following device-specific data is
5. Complete identification: Identifying an analyzer module (Page 47).
See also
Overview (Page 45)
46
The menu includes all identification data specified for the device in the factory. You have
the option to assign a device name and enter the commissioning date.
The device name is used as a means of identifying the device in a network.
– Authorize access with Standard PIN, if necessary.
– You can use up to 31 characters for the designation.
displayed:
Display field
Product name
Order No. Part 1
1)
Order No. Part 2
1)
Order No. suffixes
1)
Serial number
Hardware version
Firmware version
Complete order number, e.g.: 7MB3000-0AA00-0AA0-ZABC
1)
Remark
SIPROCESS GA700
Display of first part of device order number,
e.g., "7MB3000".
Display of second part of device order number,
e.g., "0AA00-0AA0".
Display of order number suffix, e.g., "ZABC".
The order number suffix identifies options for
your device.
Display serial number of the device.
Display hardware version of the device.
Display installed firmware version.
Compact Operating Instructions, 01/2013, A5E31805656-01
Quick Start