Setting Functions/Components Of A Digital Output - Siemens SIPROCESS GA700 Quick Start Manual

7.8.4

Setting functions/components of a digital output

Procedures
Table 7- 11
Function
(pre-selection)
Free
Table 7- 12
Function
(pre-selection)
Fault
Table 7- 13
Function
(pre-selection)
Maintenance...
Quick Start
Compact Operating Instructions, 01/2013, A5E31805656-01
Function (pre-selection) "Free"
Purpose/resulting settings
No function. Set one of the following pre-selections or cancel the process.
Function (pre-selection) "Fault"
Purpose/resulting settings
Signal fault.
1. "Function" parameter field: Authorize access with corresponding PIN, if
necessary.
2. Set "Fault" value.
Function (pre-selection) "Maintenance alarm", "Maintenance demanded", and
"Maintenance required"
Purpose/resulting settings
Signal maintenance alarm, maintenance demanded or maintenance required:
1. "Function" parameter field: Authorize access with corresponding PIN, if
necessary.
2. Set the required message level.
Commissioning
7.8 [2.09.5] Digital outputs
65